BS5308 Cables
BS5308
BS5308: 1986 was officially withdrawn and replaced by BS EN 50288-7 on 1st April 2009. However as it will take some time for the new standard to become established as the norm, we will continue to offer cables to BS5308 where required by customers. PAS5308 To many specifiers BS5308 is regarded as "the" standard...more
armoured power & control cables
Cables are intended for use in fixed installations in industrial and building applications. The cables are suitable for indoor, outdoor or direct burial. Voltage rating 600/1000V Conductor Stranded Class 2 to IEC 60228. Solid,class 1 are available for 1.5mm2 and 2.5mm2 Insulation and bedding...more
ESI 09-6 cables
This standard uses multicore and multipair cables with PVC or Polythene insulation. The conductors are 1/0.8mm PCW, (Issue 6), 7/0.67mm PCW (Issues 5 or 6), or 1/0.9mm TCW (Issue 5) The PVC insulated multicore cables are intended for use in power stations and substations for remote operation of electrical switchgear. ...more
def. stan 61-12 pt 4 & 5
These are produced as sub-miniature with a conductor size of 7/0.2mm (Pt 4) and a maximum current of 1 amp, or small, with a conductor size of 16/0.2mm (Pt 5) and a maximum current of 2.5 amps. If a current greater than 2.5 amps is needed a conductor size of 37/0.315mm is used with up to 4 cores. In this case the current should not...more
thermocouple cables
Permanoid manufacture thermocouple extension and compensating leads with a range of conductors. These are manufactured using either Polythene or high temperature PVC. The maximum operating temperature for these cables is 70°C for Polythene or 105°C for PVC. Cables are constructed generally to BS5308, for...more
bespoke
...more